- Apply project’s code formatting and conventions
- Don’t use the IO and worker thread configuration when creating the
worker for the AccessLogReceiver. The IO and worker thread
configuration is for HTTP request processing and a worker in its
default configuration should be sufficient for the access log
receiver.
- Don’t use a temporary directory as the default for the access log
directory. A temporary directory makes (some) sense for Tomcat as it
requires a directory for its basedir. Undertow has no such
requirement and using a temporary directory makes it hard to locate
the logs. The default has been updated to a directory named logs,
created in the current working directory.
- Document the new properties in the application properties appendix
Closes gh-3014
This commit adds support for configuring Undertow's access log via the
environment using the following properties:
server.undertow.access-log-enabled
server.undertow.access-log-pattern
server.undertow.access-log-dir
See gh-3014
This avoids a potential problems with ordering between Dropwizard and
normal repository configuration. A Dropwizard sample has been added to
verify the behaviour.
In addition to the changes already made in 1.2.x, this commit updates
the tests in spring-boot-actuator to ensure that any Elasticsearch
data files are written into the target directory. This avoids problems
when switching branches caused by different versions of Elasticsearch
trying to read the files.
By default, Elasticsearch writes it data to ./data. This led to data
being left on the filesystem after a mvn clean which could cause
failures when moving between branches that use different versions of
Elasticsearch.
This commit updates the tests for the Elasticsearch sample and
the Elasticsearch auto-configuration classes to write the
Elasticsearch data and logs into the target directory.
This reverts commit b1c0a7cda4.
The plugin publishing process has moved to a new plugin-based approach
that brings with it some significant limitations:
- There's no staging to allow the promotion of good release builds
- There's no easy way to upload an existing artifact
- There's no control over the published pom.
The risk brought by these limitations, particularly the first, are
too great so we will no be publishing the Boot plugin to the Portal
until they're resolved.
Changing the plugin's ID was a breaking change that would require
users to do some work when they upgrade to Boot 1.3. The ID of the
plugin was changed purely so that it met the Portal's requirements.
Given that the plugin will not be published to the Portal for the
foreseaable future there's no need for us to inflict a breaking change
on people when there will be no benefit.
See gh-1567
The changes made in spring-projects/spring-framework@e403aefe cause
SampleTomcatTwoConnectorsApplication to fail to launch. The port bean,
typed as an int, is coerced into an Integer when the bean’s created. The
port() method is then called, and the proxy’s bean method interceptor
complains as it’s expecting the port bean to be an int but it’s actually
an Integer. Changing the port() bean method’s return type to Integer
works around the problem.
The versions in the dependency management for the various datastore
dependencies have been aligned with those used by Spring Data Fowler.
The Data REST tests and sample application has been updated to configure
the base path in favour of the deprecated base uri property
Closes gh-2673
Spring Framework’s ParamterizedRowMapper has been deprecated since
3.1 and has been removed in 4.2. Spring Batch currently relies on
ParameterizedRowMapper, making it incompatible with 4.2. To allow us to
build successfully against 4.2, this commit ignores Spring Boot’s tests
that use Spring Batch’s JDBC support.
See gh-2575
Gradle’s plugin portal requires each plugin’s ID to be in a namespace.
Our existing ID, spring-boot, does not meet this requirement. This
commit changes the plugin’s ID to org.springframework.boot.spring-boot.
Note that, as is recommended [1], the plugin’s ID does not include
“gradle”.
See gh-1567
[1] http://plugins.gradle.org/submit
The response produced by Spring Data REST to a search that will always
return a single result, i.e. the return type is Foo rather than
List<Foo> or Page<Foo> has improved in Fowler. Previously, the response
would contain a single embedded resource. In Fowler, the response now
contains the resource that used to be embedded as a top-level resource.
This commit updates the expectations in one of the sample’s tests to
match this new behaviour.
See gh-2673
Update ElasticsearchAutoConfiguration to ensure that local nodes are
closed when the context is closed. Prior to this commit the close()
method of the Client would be called which had no effect for local
Nodes.
Fixes gh-2480
Undertow’s WebSocket client sends an illegal Origin header – it does
not include the scheme, e.g. it’ll send “localhost” rather than
“http://localhost”. This commit works around the problem by allowing
access to the SockJS endpoints from any origin, thereby disabling
OriginHandlerInterceptor’s checking of the Origin header.
Spring Integration's FileWritingMessageHandler uses a .writing file
while it's in the process of writing a message to disk and then
performs a rename (depending on the OS and filesystem this may or may
not be atommic) to create the .msg file. Prior to this commit the
test was finding the temporary .writing files and examining them. This
could lead to a FileNotFoundException being thrown as the temporary
file was deleted while the test was trying to read its contents.
This commit updates the test to only look for files with a .msg suffix
Fixes gh-2428
Previously, SampleIntegrationParentApplicationTests assumed that when
an output file existed on disk its contents would have been written
in their entirety. This assumption does not hold true and causes the
test to fail intermittently as it incorrectly determines that the test
has produced no output.
This commit updates the test to wait for up to 30 seconds for the
output files to appear on disk and for the expected content to be
found in one of those files. If the files exist but do not
contain the expected content the test will keep trying until it does
or until too much time as elapsed.
Fixes gh-2380
Previously, the documentation only provided examples of the required
configuration for Maven users. This commit adds equivalent configuration
snippets for those using Gradle. It also removes the recommendation to
override the version of the Servlet API as this is unnecessary. The pom
files for the Jetty 8 and Tomcat 7 samples have also been updated
accordingly.
Closes gh-2346
Undertow, like Tomcat, uses "" for the context path of the root
context. Previously, the Undertow deployment was being configured with
"/" for the root context. This was leading to a silent failure in
AsyncContextImpl.dispatch when it failed to look up the deployment
manager for the current request.
This commit updates UndertowEmbeddedServletContainerFactory to use the
correct context path (an empty String) for the root context.
Fixes gh-2365
A dependency on org.glassfish.jersey.ext:jersey-bean-validation has
been added to spring-boot-starter-jersey. jersey-bean-validation’s EL
dependencies have been excluded in favour of those provided by
spring-boot-starter-tomcat (or starter-jetty or starter-undertow should
the user choose to use a different embedded container).
Closes gh-2315
The package names changed a bit from the prototype project, but wuth vanilla
autconfiguration usage that shouldn't matter. Follows closely the Groovy
templates support. Templates live in classpath:/templates/*.html by default.
Fixes gh-2242
Update ManagementSecurityAutoConfiguration so that MVC Endpoints that
have Principal arguments are not treated in any special way. This
restores Spring Boot 1.1.x behavior where the 'sensitive' flag is used
to determine access rules.
The HealthMvcEndpoint still uses the Principal (when available) to
determine if full status information can be displayed. It now also
explicitly checks the environment for `endpoints.health.sensitive`
to determine if the user has opted-out and requires complete health
details.
The health MVC endpoint should now work as follows:
* Default configuration - No login is required, full information is only
displayed if a Principal is available.
* endpoints.health.sensitive=true - Login is required, full information
is displayed.
* endpoints.health.sensitive=false - Login is not required, full
information is displayed.
Fixes gh-2211
Shares the /health endpoint request mapping between security config
and MVC dispatcher. Generalizes so that instead of a marker
interface (AnonymouslyAccessibleMvcEndpoint), an MvcEndpoint
signals that it wants to control its own access rules by adding
a Principal to the @RequestMapping method parameters (more @MVC).
Fixes gh-2015 slightly differently
The changes in 3bb598a overload the health endpoint's sensitive
property such that it's now considered sensitive if management
security is enabled. When an endpoint is sensitive anonymous
access is prevented. This breaks the health endpoint which should
return a filtered view of the server's health when it's accessed
anonymously rather than rejecting the request.
This commit introduces AnonymouslyAccessibleMvcEndpoint, a marker
extension of the MvcEndpoint interface. It is implemented by
HealthMvcEndpoint. ManagementSecurityAutoConfiguration has been
updated to allow anonymous access to endpoints that aren't sensitive
or that implement AnonymouslyAccessibleMvcEndpoint.
Fixes gh-2015
Previously, index.html used absolute paths to load its CSS and
JavaScript. This meant that it had to be deployed to /. This commit
updates the HTML to use relative paths for its CSS and JavaScript,
thereby ensuring that they can be loaded irrespective of the context
path to which the application is deployed.
Closes gh-1988
If you inject the class (via a servlet parameter) it seems that
Jersey tries to create all the beans for you (and fails). I thought
it was supposed to work (according to the docs), so I'm a bit confused
but the sample now has Spring DI and the tests pass.
Fixes gh-1981
Update MongoDataAutoConfiguration to provide easier configuration of
CustomConversions, the MappingMongoConverter, MongoMappingContext
and an authentication database.
Fixes gh-1619
Fixes gh-1730
Including maps and lists. Beans with no metadata (in
/META-INF/*spring-configuration-metadata.json) are just serialized
as they come (so might have problems like cycles). Serialization
errors are caught and rendered as an "error" for that bean. Any
problems can be fixed by preparing metadata and specifying which
properties are to be rendered that way.
Fixes gh-1746, fixes gh-1921
The http.mappers.* configuration properties assumed that the mapping
was JSON (on of the property names was jsonPrettyPrint) and also only
exposed a small subset of the configuration options supported by
Jackson (and GSON). The property names implied that it would configure
all HTTP mapping, however it was ignored by GsonAutoConfiguration.
This commit deprecates the support for http.mappers.* in favour of
configuring Jackson or Gson instead. Jackson can be configured
declaratively using the spring.jackson.* properties or programtically.
Gson can be configured programatically by using a GsonBuilder to
create a Gson instance with the desired configuration.
gh-1946 has been opened to add support for declarative configuration
of Gson.
Closes gh-1945
ServerConnector is in different packages in Jetty 8 and Jetty 9 which
was leading to a NoClassDefFounderError when SSL was used with
Jetty 8.
This commit updates SslServerConnectorFactory to return an
AbstractConnector, a super class of ServerConnector, that is in the
same package in both Jetty 8 and Jetty 9. This class does not provide
a setPort method so the setting of the port has been pushed down into
the SslServerConnectorFactory implementation.
SSL samples for both Jetty 8 and Jetty 9 have been added to verify
SSL with both supported versions of Jetty.
Closes gh-1925
The exception message for a connection timeout has been updated to
include the timeout period. The tests for the sample have been updated
accordingly.
Closes gh-1884
Traditionally, a @ServerEndpoint-annotated bean is found by a servlet
container initialiser, however Boot does not run servlet container
initialisers when an embedded container is being used. To be able to use
@ServerEndpoint in a Boot app that uses embedded Tomcat a
ServerEndpointExporter bean must be declared.
This commit updates the documentation to describe this requirement and
also updates the WebSockets sample to illustrate the use of
ServerEndpointExporter. The version of Spring Framework has been updated
to 4.0.8.BUILD-SNAPSHOT. This picks up the fix for SPR-12340.
Closes gh-1722
Change the default value of spring.datasource.jmx-enabled to false
to prevent InstanceAlreadyExistsException problems when using the
Spring Test Framework.
Fixes gh-1590
Switch the Tomcat 8 and Jetty 9 samples to Tomcat 7 and Jetty 8. Since
Tomcat 8 and Jetty 9 are now the default versions the previous samples
are no longer relevant, however, we do need integration tests to check
that we remain compatible with Tomcat 7 and Jetty 8.
See gh-1832
It *is* very useful to have filtering on by default, so that is now
the case (in spring-boot-starter-parent). Users can filter resources
by default by adding @*@ placeholders (so as not to clash with Spring
${} placeholders).
Fixes gh-1199
Prior to this commit LoggingSystem initialization would happen multiple
times. Once to configure "quiet" logging, and again to configure correct
settings once the Application was initialized. This could cause problems
if `logging.groovy` logback files were used.
The logging system is now only initialized once (when possible) by
following these steps:
- Standard logging initialization occurs via the actual logging
implementation used (e.g. logback will load a logback.xml file if it
exists)
- beforeInitization() is called to prevent early log output.
Implementations now either use a Filter or simply set the root logging
level.
- initialize() is called with an optional log configuration file (e.g
a custom logback.xml location) and an optional log output file (the
default is null indicating console only output).
The initialize() method will attempt to prevent double initialization
by checking if a standard configuration file exists. Double
initialization now only occurs in the following situations:
- The user has a standard configuration file (e.g. classpath:logback.xml)
but also specifies a logging.config property. Double initialization is
required since the specified configuration file supersedes the default.
- The user has a standard configuration file (e.g. classpath:logback.xml)
and specifies a logging.file property. Double initialization is
required since the standard configuration may use a ${LOG_FILE}
reference.
In addition this commit removes the `logging.console` option and now
assumes that logging either occurs only to console or to both the
console and a file. This restriction helps simplify the LoggingSystem
implementations. If file only logging is required a custom logback.xml
can be used.
Fixes gh-1091
See gh-1612, gh-1770
Then we can optionally find a non-anonymous principal if there
is one. If the user is anonymous then the health result is cached
up to endpoints.health.ttl (default 1000ms) to prevent a DOS attack.
Fixes gh-1353
Previously, there was a timing window where the output file had been
created but it was empty. This would cause the test to fail as the
output was read from the empty file and didn’t match the expected “Hello
World”.
This commit updates the test to only process the resources in the output
directory when all the resolved resources have a non-zero content
length. An @Before method has also been added to delete the output
produced by the test so that the outcome of the test isn’t affected by
files generated by previous runs.
Fixes gh-1735
Update FaviconConfiguration to allow favicon.ico files to be resolved
from static resource folders (/META-INF/resources, /resources, /static,
/public) in addition to the root classpath.
Fixes gh-1656
Previously, RepositoryRestMvcBootConfiguration was not annotated with
@Configuration. This meant that it was processed in lite mode.
Crucially, in lite mode, there’s no proxying so each call to the
config() @Bean method from within other @Bean methods resulted in the
creation of a new RepositoryRestConfiguration instance. Furthermore, as
each of these instances wasn’t a Spring bean the configuration
properties were not applied.
This commit updates RepositoryRestMvcBootConfiguration to annotate it
with @Configuration so that it’s no longer processed in lite mode. It
also updates the unit tests and the Spring Data REST sample to verify
that the baseUri can be configured using application.properties.
Fixes gh-1675
Jersey 2 has some Spring support built in but it's a bit awkward to
use in a Boot app, so autoconfiguration seems appropriate. The tests
and sample show how to use it, but the short story is that any
@Component can define JAX-RS endpoints via @GET etc.
There's a sample for Jersey 1 as well (pay careful attention to
the plugin configuration if you want to build an executable jar)
Fixes gh-1651
Without the @Param annotations, using either of the search URIs would
resulted in a 400 response and an error describing the lack of @Param
annotation.
See gh-1627
If the actuator endpoints are configured on a different port then there
are some settings in the main ServerProperties that we would like to
re-use (e.g. the access log). The easiest way to do that is to just
configure the management server using the same ServerProperties instance
and then overwrite the things that are different (and stored in
ManagementServerProperties).
Fixes gh-1581
There was too much state really in the old implementation of
AuthenticationManagerConfiguration, and it was leading occasionally
to null pointers when method A assumed that method B had already
been called and it hadn't. This change manages to concentrate all the
references to an AuthenticationManagerBuilder into a single method
call, removoing the need for storing it at all.
Fixes gh-1556
Prior to this commit, the repackage goal silently ignored the case of
two libraries having the same name and version but a different group.
As a result, the second library was overwriting the first one in the
repackaged jar.
This commit adds support for custom Library names and updates the
Maven and Gradle plugins so that the name includes the group ID
when there would otherwise be a duplicate.
Fixes gh-1475
Velocity and Freemarker share some common properties so the base class for
configuring their properties makes some sense. Unfortunately the implementation
pulls in Spring MVC at runtime because of the signature of one method (that
would never be called). We can fix that in a number of ways, but the least
disruptive is probably to change the signature of that method and only refer
to the concrete template view resolver type if the method is called.
Fixes gh-1437
We can't easily solve the problem by not allowing Spring Security to
eagerly instantiate everything, but we can be defensive about data.sql
and make sure it is executed even if the listener isn't yet registered.
Fixes gh-1386
Updates to prevent the maven-invoker-plugin from downloading remote
snapshot jars. Possibly caused by the recent changes to the
spring-boot-dependencies POM.
See gh-1413
if user also adds @EnableWebMvcSecurity. The problem is that the ordering
of the init() and configure() methods in the Spring Security configurers
can force things to happen too early unless we are careful. It's still a bit
twitchy I would say, but this relatively small change seems to fix the GS guide
and not break any existing tests.
I added a sample which mimic ths GS guide so we get an integration test that
executes the new code paths.
Fixes gh-1364
Rename `VanillaHealthIndicator` to `ApplicationHealthIndicator` and
changed the exposed bean name from `statusHealthIndicator` to
`applicationHealthIndicator`.
This provides less confusing JSON output:
{"status":"UP","application":{"status":"UP"}}
vs:
{"status":"UP","status":{"status":"UP"}}
Fixes gh-1291
The request is being made to '/' and, while the application does have
a mapping for '/', that mapping is not looked for before Spring
Security's filter rejects the request with a 401. This means that the
request is considered to be unmapped and this is reflected in the
metric's name.
See #1331 and #1333
It needs to run as soon as the DataSource is available really otherwise
anything else that depends on the DataSource (like Security JDBC
initializers) might fail when it tries to use it.
One change from 1.1.1 is that if you have a schema.sql you had better
make sure your data.sql talks to the same tables. In 1.1.1 you could
sometimes get away with letting Hibernate initialize the tables for
your data.sql and *also* have a schema.sql. This was fragile and doomed
to fail eventually if the DataSourceInitializer somehow got
initialized earlier (e.g. through a @DependsOn), so in the spririt
of honesty being the best policy we explicitly disallow it now.
Fixes gh-1115
When there are parent contexts we already had a strategy for registering
the actuator endpoints, but not the regular JMX or Integration MBeans.
This chnage makes the autoconfigs for JMX aware of the parent context.
Also adds a sample with a parent context.
See gh-847
- upgraded Spring WS to 2.2.0.RELEASE
- replaced default MVC DispatcherServlet with MessageDispatcherServlet
- migrated XML based config with nww Spring WS Java config
Fixes: gh-412
They all want to create an MBeanServer and when that happens
user sees no MBeans, or sometimes just one set (Spring Core,
Spring Integration or Spring Boot). To harmonise them we
create a @Bean of type MBeanServer and link to it in the
other autoconfigs
Fixes gh-1046
There were some residual issues to do with the changes to the implementation
of security.basic.enabled=false. It was a good idea to have a filetr chain
triggered by the flag being off because it smooths the way for user-defined
filter chains to use the Boot AuthenticationManager (as a first step at least),
but it wasn't a goog idea to add any actual secuity features to that filter.
E.g. if it has HSTS then even an app like Sagan that has some secure endpoints
that it manages itself and the rest is unsecured has issues because it can't
accept connections over HTTP even on unsecure endpoints.
TODO: find a way for security.ssl_enabled=true to apply to only the user-
defined security filter (maybe not possible or worth the effort, since they
can inject a SecurityProperties if they need it?).
See gh-928
Provide auto-configuration support for HornetQ JMS broker, along with
an additional starter POM.
The connection factory connects to a broker available on the local
machine by default. A configuration switch allows to enable an embedded
mode that starts HornetQ as part of the application.
In such a mode, the spring.hornetq.embedded.* properties provide
additional options to configure the embedded broker. In particular,
message persistence and data directory locations can be specified. It is
also possible to define the queue(s) and topic(s) to create on startup.
Fixes: gh-765
Actually the web-secure sample is misusing
security.basic.enabled=false (IMO) - it should be a flag
to say that you want to temporarily disable the basic security
fallback on application endpoins, not way to disable all
security autoconfiguration.
Added test case to web-secure sample to ensure a user
can log in.
Fixes gh-979
when server.servletPath is set we need to add prefixes to
the security filter paths, and the /error path.
Conflicts:
spring-boot-actuator/src/main/java/org/springframework/boot/actuate/autoconfigure/ManagementSecurityAutoConfiguration.java
Andy Wilkinson
Marcos Barbero
Dave Syer
Phillip Webb
Spring Buildmaster
Stephane Nicoll
Eddú Meléndez
izeye
sopov.ivan
Daniel Fullarton
matzschmanski
Manuel Doninger
bangsen.yin
Stéphane DERACO
Dave Syer
Josh Long
Phillip Webb
Andy Wilkinson
Stephane Nicoll
Maciej Walkowiak
Marten Deinum
Javier Gayoso
Artur Konczak