Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
Prior to this commit, when the Maven plugin copied
spring-boot-loader.jar to a repackaged archive the timestamps of class
files were preserved but the timestamps of directories were not
preserved. This resulted in the directories having a current timestamp.
This commit copies the directory timestamps from spring-boot-loader.jar
to the repackaged archive and adds tests to verify the proper
behavior.
See gh-20927
Update the Maven plugin so that layered jars now use the regular "flat"
format. The layers.idx file now describes which layer each file should
be placed.
See gh-20813
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Create a dedicated layer that is used to hold the launcher support
classes. The layer sits between `dependencies` and
`snapshot-dependencies` so that the layer is sensible for both
SNAPSHOT and RELEASE versions of Spring Boot
Closes gh-20529
Simplify layer customization logic for both Maven and Gradle and
refactor some internals of the Gradle plugin.
Both Maven and Gradle now use a simpler customization format that
consists of `application`, `dependencies` and `layer order` sections.
The `application`, `dependencies` configurations support one or more
`into` blocks that are used to select content for a specific layer.
Closes gh-20526
This commit adds configuration to the Spring Boot Gradle plugin that
allows the names and contents of layers to be customized in the build
configuration.
Fixes gh-20296
Maven's war plugin does not support reproducible builds, resulting in
the entries in the war file not being written in a consistent order
from build to build.
Closes gh-20176
This commit adds an additional 'layers/configuration' property that can
be used to refer to a separate layers configuration file. This separate
file defines:
* The layers and their order of precedence,
* How libraries are handled using filters that match against the
coordinates of each library, and
* How classes are handled using filters that match against the location
of the entry
An XSD to validate the XML configuration file is available.
Closes gh-20295
Co-authored-by: Stephane Nicoll <snicoll@pivotal.io>
Update all dependencies declarations to use the form `scope(reference)`
rather than `scope reference`.
Prior to this commit we declared dependencies without parentheses unless
we were forced to add them due to an `exclude`.
Replace Gradle single quote strings with the double quote form
whenever possible. The change helps to being consistency to the
dependencies section where mostly single quotes were used, but
occasionally double quotes were required due to `${}` references.
Previously, the generated resources were added as an output to the
main source set. This worked on the command line, but resulted in
the META-INF folder that contains the loader jar not being on the
classpath of downstream projects in Eclipse.
This commit changes loader-tools to add the generated resources
as a srcDir to the main source set. This results in it appearing on
the classpath of other projects in Eclipse that depend on loader-tools
such as the Gradle plugin, thereby allowing its tests to be run in
the IDE as well as on the command line.
Fixes gh-19841
Pull functionality from `Repackager` into a new `Packager` base class
and develop a variant for Docker image creation. The new `ImagePackager`
class provides a general purpose way to construct jar entries without
being tied to an actual file. This will allow us to link it to a
buildpack and provide application content directly.
Closes gh-19834
Support an alternative fat jar format that is more amenable to Docker
image layers.
The new format arranges files in the following structure:
BOOT-INF/
layers/
<layer-name #1>
/classes
/lib
<layer-name #2>
/classes
/lib
The `BOOT-INF/layers.idx` file provides the names of the layers and the
order in which they should be added (starting with the least changed).
The `JarLauncher` class can load layered jars in both fat and exploded
forms.
Closes gh-19767
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Update the `Repackager` class so that an additional `classpath.idx` file
is written into the jar that provides the original order of the
classpath. The `JarLauncher` class now uses this file when running as
an exploded archive to ensure that the classpath order is the same as
when running from the far jar.
Closes gh-9128
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
This paves the way for publishing Gradle module metadata once the
problem caused by snapshot versions and our two-step publication
process has been addressed.
See gh-19609
This reverts commit b34a311d02 as,
having disabled the publishing of Gradle's module metadata (4f75ab5),
the changes are no longer needed.
See gh-19609
Previously, enforcedPlatform dependencies were using to pull in the
constraints defined in spring-boot-dependencies and
spring-boot-parent and applied them strictly so that the constrained
version had to be used. This worked as intended in Spring Boot's own
build but incorrectly enforced those same strict version requirements
on external consumers of Spring Boot's modules.
This commit reworks how Spring Boot defines its internal dependency
management so that platform dependencies are exposed to external
consumers while enforced platform dependencies are using internally.
See gh-19609
Previously, when RunProcess handled a SIGINT it would immediately
attempt to destroy the process that it had run. This created a race
condition between the SIGINT being handled by the child process
and RunProcess destroying the child. The exact behavior of destroy
is implementation dependent and it may result in forcible termination
of the process where shutdown hooks are not called. This is what
happens on Windows. The exit code in such a case is 1 which prevents
anything from waiting for the process to complete from detecting
that it ended as a result of a SIGINT, leaving it with no choice but
to report an error. This is what happens with mvn spring-boot:run
with a forked process on Windows and results in the build failing.
This commit updates RunProcess to allow the child process to handle
the SIGINT itself, waiting for up to five seconds for that to happen
before the process is then destroyed. Given this time, the child
process exits with 130 which RunMojo already handles correctly as
indicating that the process died due to SIGINT and the build completes
with success as a result.
Fixes gh-18936
Previously, Maven's default behaviour was relied up which resulted
in the artifact ID being appended to each URL as it was inherited.
This behaviour can only be disabled in Maven 3.6 and later, a version
that we cannot use due to an incompatibility with the Flatten Plugin.
This commit works around Maven's default behaviour by defining
properties for the SCM URL, connection, and developer connection and
then explicitly defining the settings in each pom using these
properties. The explicit definition of the properties in each pom
prevents them being inherited from the parent, thereby disabling the
unwanted appending of the artifact ID to the URL.
Fixes gh-18328
Apply checkstyle rule to ensure that private and package private
classes do not have unnecessary public methods. Test classes have
also been unified as much as possible to use default scoped
inner-classes.
Closes gh-7316
Since the move to JUnit 5, a number of tests were failing on Windows.
The majority were failing due to open file handles preventing the
clean up of the tests' temporary directory. This commit addresses
these failures by updating the tests to close JarFiles, InputStreams,
OutputStreams etc.
A change has also been made to CachingOperationInvokerTests to make
a flakey test more robust. Due to System.currentTimeMillis() being
less precise on Windows than it is on *nix platforms, the test could
fail as it would not sleep for long enough for the TTL period to have
expired.
With JDK 8 being the baseline and JDK 7 not being supported anymore we
can get rid of the workaround for a JDK 7 bug in
ProcessBuilder.inheritIO on Windows machines.
Closes gh-12337
Previously, the order of the entries in a TestJarFile was determined
by the underlying file system rather than by the order in which
they were added. This could lead to unpredicatable ordering and
failures in tests that verify archive entry ordering.
This commit updates TestJarFile to add entries to the archive in
insertion order.
See gh-11695
See gh-11696
Previously, the Repackager would write entries in the following
order:
- Libraries that require unpacking
- Existing entries
- Application classes
- WEB-INF/lib jars in a war
- Libraries that do not require unpacking
- Loader classes
Libraries that require unpacking were written before existing entries
so that, when repackaging a war, an entry in WEB-INF/lib would not
get in first and prevent a library with same location from being
unpacked. However, this had the unwanted side-effect of changing
the classpath order when an entry requires unpacking.
This commit reworks the handling of existing entries and libraries
that require unpacking so that existing entries can be written first
while also marking any that match a library that requires unpacking
as requiring unpacking.
Additionally, loader classes are now written first. They are the
first classes in the jar that will be used so it seems to make sense
for them to appear first. This aligns Maven-based repackaging
with the Gradle plugin's behaviour and with the structure documented
in the reference documentation's "The Executable Jar Format" appendix.
The net result of the changes described above is that entries are
now written in the following order:
- Loader classes
- Existing entries
- Application classes
- WEB-INF/lib jars in a war marked for unpacking if needed
- Libraries
Closes gh-11695
Closes gh-11696
dreis2211
Andy Wilkinson
Phillip Webb
Johnny Lim
Scott Frederick
Madhura Bhave
Stephane Nicoll
zhangt2333
Wagner Macedo
Spring Operator
Robert Thornton
igor-suhorukov
Andreas Gebhardt
Oliver B. Fischer
Dmytro Nosan
andrey.onufreyko