This commit adds configuration to the Maven and Gradle plugins to
allow specifying the names of build and launch cache volumes provided
to the CNB builder.
See gh-28292
This commit adds configuration to the Maven and Gradle plugins to
allow specifying multiple tag to be created that refer to the built
image.
See gh-27613
Adding a label to the ephemeral builder image cloned from the base
builder image eliminates contention between builds that are run
concurrently. Without this label, concurrent builds could result in
a race condition in the Docker daemon if the ephemeral builder image
shared by builds was deleted by both builds at exactly the same time.
Fixes gh-27888
This commit adds configuration to the Maven and Gradle plugins to
allow specifying the network mode to be provided to the image
building goal and task.
See gh-27486
An upgrade to Apache Commons Compress allows the build plugins to write
the launch script to the fat jar as a proper preamble, making the file
compatible with more jar and zip tooling.
Fixes gh-22336
When a custom buildpack is provided for image building, the contents
of the buildpack directory, tgz file, or image are copied as tar
entries to a new layer in the ephemeral builder image. Prior to this
commit, only file entries from the buildpack source were copied as
builder layer tar entries; intermediate directory entries from the
source were not copied. This results in directories being created in
the builder container using default permissions. This worked on most
Linux-like OSs where the default permissions allow others-read
access. On some OSs like Arch Linux where the default directory
permissions do not allow others-read, this prevented the lifecycle
processes from reading the buildpack files.
This commit explicitly creates all intermediate directory tar entries
in the builder image layer to ensure that the buildpack directories
and files can be read by the lifecycle processes.
Fixes gh-26658
Update `ImageName` and `ImageReference` to use distinct regex patterns
to parse specific parts of the value. Prior to this commit a single
regex pattern was used which could hang given certain input strings.
Fixes gh-23115
This commit copies the file mode along with other attributes when
copying files from the source archive to the build container while
building an image using the Gradle plugin. This preserves file
permissions on any resources included in the source archive.
Fixes gh-25915
This commit corrects the order.toml file that is generated and added
to the builder when building an image using custom buildpacks with the
Maven or Gradle plugin in order to support buildpacks that depend on
detection as a group.
Fixes gh-25378
This commit adds configuration to the Maven and Gradle plugins to
allow a list of volume mount bindings to be provided to the image
building goal and task. This enables service bindings to be mounted
in the builder image that are recognized by buildpacks to support
custom certificates, build tool configuration, APM integration, and
other buildpack features.
Fixes gh-23518
This commit adds configuration to the Maven and Gradle plugins to
allow a list of buildpacks to be provided to the image building
goal and task.
Fixes gh-21722
Update `build.gradle` files to ensure that `junit-platform-launcher` is
a `testRuntimeOnly` dependency. This ensures that tests can be run from
Eclipse.
Closes gh-25074
Previously, when an authenticated Docker builder registry was
configured in the Maven or Gradle plugin and the builder and run
images specified different registries, the authentication credentials
would be sent to both registries. This could cause confusion if both
registries don't recognize the same credentials. This commit enforces
that both images are in the same registry when authentication
is configured.
Fixes gh-24552
Docker daemon authorization plugins reject POST or PUT requests that have a
content type `application/json` header but no content length header. This
commit ensures that a content length header is provided in these cases.
This is a cherry-pick of the changes in d5b2836ec9
which were lost in a forward-merge.
Fixes gh-23957
Docker daemon authorization plugins reject POST or PUT requests that have a
content type `application/json` header but no content length header. This
commit ensures that a content length header is provided in these cases.
Fixes gh-22840
This commit adds support for platform API 0.4 when invoking a CNB
builder in the Maven and Gradle plugins. If the builder advertises
that it supports platform API 0.4 then that version will be
requested when invoking lifecycle phases. Otherwise the plugins
will fall back to requesting platform API 0.3.
Requesting platform API 0.4 when invoking builder lifecycle phases
has the primary benefit of making it easier to pass command-line
arguments to the default process in the generated image.
Fixes gh-23692
The CNB specifications allow builders to support multiple platform
API versions. The supported versions are published in the builder
image metadata as an array of version numbers, while a single
supported version number was published in earlier builder metadata.
These changes read the supported versions from the builder metadata
and fall back to the single version if the array is not present.
A CNB_PLATFORM_API environment variable is set on each lifecycle
phase invocation to request a specific version as recommended in
the CNB platform spec.
Fixes gh-23682
This commit updates the default builder image used by the Maven
and Gradle plugins image-building goal and task to use the latest
Paketo builder image. The builder image is pulled from Docker Hub
instead of Google Container Registry by default.
See gh-23628
This commit adds options to the Maven and Gradle plugins to publish
to a Docker registry the image generated by the image-building goal
and task.
The Docker registry auth configuration added in an earlier commit
was modified to accept separate auth configs for the builder/run
image and the generated image, since it is likely these images will
be stored in separate registries or repositories with distinct
auth required for each.
Fixes gh-21001
This commit adds the ability to configure the Maven and Gradle
plugins to use a remote Docker daemon using build file
configuration, as an alternative to setting environment variables
to specify remote host connection details.
Fixes gh-23400
This commit adds the ability to configure Docker image registry
authentication credentials in the Maven and Gradle plugins. The
authentication credentials are passed to the Docker daemon with
all daemon API calls, and the daemon forwards the credentials to the
image registry when necessary. This makes it possible to use
builder and run images stored in a private Docker registry.
See gh-22972
In some cases, a call to the Docker image load API will fail but
return a 200 OK response status code and an empty response. This
commit detects that the response from this call is empty and
treats this condition as an error instead of a silent failure.
Fixes gh-23130
This commit changes the path used to invoke lifecycle binaries in
CNB builders from `/lifecycle` to `/cnb/lifecycle` to conform to
the CNB spec. This will ensure the build plugin image-building
goals and tasks are compatible with future versions of builders
that may not support both paths.
See gh-23009
This commit adds a pullPolicy option to the configuration of the Maven
plugin spring-boot:build-image goal and the Gradle plugin bootBuildImage
task. The new option gives users control over pulling the builder image
and run image from a remote image registry to the local Docker daemon.
See gh-22736
Prior to this commit, an entry in the environment map provided to the
build plugin image building goal or task that had a null value would
result in a failure with a message that was difficult to diagnose.
This commit treats env map entries with a null value as an empty
entry to prevent the failure and also make it easier to provide an
explicit empty entry in the Maven XML.
Fixes gh-22703
This commit adds a check to the support code for the Gradle plugin
bootBuildImage task to ensure that the jar file that will be passed
to a builder is readable and has a valid directory. This prevents a
situation where the jar file cannot be read because it is prepended
with a launch script, and the builder does not receive any files to
process.
Notes have also been added to the Gradle plugin documentation to warn
against using a bootJar launchScript configuration and bootBuildImage
together, as well as caveats about launchScript that match the Maven
plugin documentation.
Fixes gh-22223
Rename `ImageReferenceParser` to `Regex` and remove state. The regular
expressions are now used directly by the `ImageName` and
`ImageReference` classes with the values accessed directly from the
`Matcher`.
See gh-21495
Prior to this commit, an image name or run image name derived from
the project name or provided by the user would be passed to the CNB
builder without validation by the Maven plugin build-image goal or
Gradle plugin bootBuildImage task. This could lead to error messages
from the plugins that are difficult to understand and diagnose.
This commit makes parsing of the image names more strict, based on
the grammar implemented by the Docker go library. This provides
validation of the image names before passing them to the builder,
with a more descriptive error message when parsing and validation
fails.
Fixes gh-21495
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
This commit adds a runImage property to the Maven plugin build-image
goal and the Gradle bootBuildImage task. The property allows the user
to override the run image reference provided in the builder metadata
with an alternate run image. The runImage property can be specified
in the build file or on the command line.
Fixes gh-21534
This commit changes the NamedPipeSocket used for communication with
a local Docker daemon to use a non-blocking AsynchronousByteChannel
instead of a blocking RandomAccessFile, modeled after a similar
change to the docker-java project. This eliminates the potential for
a blocking call to hang indefinitely.
Fixes gh-21672
This commit improves the error messages returned by the Spring Boot
build plugins when a 5xx status code is returned from the Docker
API while attempting to build an image. If the error response has
contents containing a JSON structure with a "message" key, the value
associated with that key will be included in the exception message
and in the build plugin output error.
Fixes gh-21515
Previously, if the Spring Boot build plugins got a connection error
when attempting to communicate with a Docker daemon (for example,
when the daemon isn't running), the error message made it appear that
the daemon returned an HTTP error code. This commit makes a connection
error distinct from an HTTP error response code to make it easier for
the user to diagnose the root cause of the problem.
Fixes gh-21554
Prior to this commit, a default tag of 'latest' was used when no tag
was included in the builder image name used when building an image in
the Maven and Gradle plugins, but the tag for the run image was left
empty if it was not provided. This resulted in errors when pulling
the run image from an image repository. This commit applies the
same tag defaulting logic to the run image name.
Fixes gh-21532
Prior to this commit, if a DOCKER_HOST environment variable was present
when attempting to communicate with a Docker daemon, it was assumed
that the value of that variable was an address that could be used to
create an HTTP connection to a remote daemon. In some cases, the value
of the variable is the path to a local socket file, which would cause
the HTTP connection to fail.
This commit adds additional validation of the value of the DOCKER_HOST
environment variable to determine whether it is a remote address or
a local socket file and create the appropriate connection type.
Fixes gh-21173
This commit modifies the buildpack platform invocation logic used by
the build plugins to invoke the single creator lifecycle introduced in
the CNB API 0.3, instead of invoking discrete lifecycle phases
separately. It also removes support for CNB API 0.2.
Fixes gh-21273
This commit changes the default builder image from
`cloudfoundry/cnb:bionic-platform-api-0.2` to
`gcr.io/paketo-buildpacks/builder:base-platform-api-0.3`. It also
uses a `paketo-buildpacks/builder` image instead of a
`cloudfoundry/cnb` image to test compatibility with lifecycle v2
and uses paketo naming instead of cloudfoundry when mocking builder
interactions.
Some adjustments to lifecycle phases were also made to align more
closely with the pack CLI.
Fixes gh-21066
This commit adds support for Cloud Native Buildpacks builder platform
API 0.3, which is the latest platform API available currently. Support
for platform API 0.1 has been removed, adopting the policy of the pack
CLI to support the current platform API version and one version prior.
Fixes gh-20757
CNB builder images are now being tagged in a manner that indicates
the version of the platform API implemented. This allows Spring Boot
to default to a builder tag that guarantees API compatibility while
allowing for updates to bundled buildpacks.
Fixes gh-20171
Prior to this commit, the build plugin goal/task for building images
required a locally running Docker daemon that was accessed via a
non-networked socket or pipe.
This commit adds support for remote Docker daemons at a location
specified by the environment variable `DOCKER_HOST`. Additional
environment variables `DOCKER_TLS_VERIFY` and `DOCKER_CERT_PATH`
are recognized for configuring a secure TLS connection to the daemon.
Fixes gh-20538
This commit fixes the `Created` date and time of the ephemeral builder
container image at the Windows epoch plus one second
(1980-01-01T00:00:01Z). This date matches the created date of the builder
image and influences the created date of the resulting image. Using
a fixed date for images ensures that the digest is consistent for all
images with the same version.
Fixes gh-20126
This commit adds a `createdBy` structure to the metadata of the ephemeral
builder container image that identifies Spring Boot as the creator of the
image, along with the Spring Boot version.
See gh-20126
This commit upgrades the default CNB builder image from
cloudfoundry/cnb:0.0.43-bionic to cloudfoundry/cnb:0.0.53-bionic.
It also adds integration tests for the Maven and Gradle plugins
to verify both versions are supported.
Cloud Native Buildpacks platform API version 0.2 introduced
two breaking changes: the order of invoking the restore and analyze
phases was reversed, and the cache phase was removed in favor of
distributing caching across other phases.
This commit adds support for Cloud Native Buildpacks builders that
implement platform API version 0.2, while maintaining compatibility
with builders that implement Lifecycle version platform API
version 0.1.
Closes gh-19829
Previously, the image builder used by the build tool plugins ignored
errors from lifecycle phases and continued with subsequent phases.
This commit inspects the status of the builder container after each
lifecycle phase and aborts the image building process if the exit
status of the container after any phase is non-zero.
Fixes#19949
Previously \r\n was used on Windows and \n was used on other
platforms. This resulted in different JSON content being written to
the archive. As the config's entry name is the SHA-256 hash of its
content, it also resulted in the entry name being different.
This commit updates the JSON that's written into the archive to use
\n line endings, irrespective of the OS on which the image is being
built.
See gh-19828
Update all dependencies declarations to use the form `scope(reference)`
rather than `scope reference`.
Prior to this commit we declared dependencies without parentheses unless
we were forced to add them due to an `exclude`.
Replace Gradle single quote strings with the double quote form
whenever possible. The change helps to being consistency to the
dependencies section where mostly single quotes were used, but
occasionally double quotes were required due to `${}` references.
Rename the `spring-boot-cloudnativebuildpack` module to
`spring-boot-buildpack-platform` and update the the package
name to `org.springframework.boot.buildpack.platform`.
Closes gh-19851
Scott Frederick
Andy Wilkinson
Stephane Nicoll
Julian Liebig
Rafael Ceccone
dreis2211
izeye
Jeroen Meijer
Phillip Webb
weixsun
Scott Frederick
Valery Yatsynovich
Emily Casey
姜为
anshlykov
Andy Wilkinson
Phillip Webb
Cicio Flaviu
Mike Smithson
Stephane Nicoll