Spring Boot will eagerly initialize a `ConversionService` named
`conversionService` for configuration keys processing. This commit adds
a note in the documentation regarding that special behaviour.
Closes gh-4162
Spring Security 4’s default configuration will, irrespective of any
other header writers that are added, enable writers for the following
headers:
- X-Content-Type
- X-XSS-Protection
- Cache-Control
- X-Frame-Options
Previously, SecurityProperties.headers used false as the default for the
properties that enable or disable these headers but the configuration is
only applied when the properties are true. This left us with the right
default behaviour (the headers are enabled) but meant that the
properties could not be used to switch off the headers.
This commit changes the defaults for the four properties to true and
updates SpringBootWebSecurityConfiguration to only apply the
configuration when the properties are false. This leaves us with the
desired defaults while allowing users to disable one or more of the
properties by setting the relevant property to false.
Closes gh-3517
So far we have wrongly advertized that the `spring-boot-starter-parent`
filters application configuration in such a way that standard Spring
placeholders are not processed.
In order to achieve such feature, the `useDefaultDelimiters` property
must be set to `false` as otherwise default delimiters are appended to
the list of custom delimiters.
This property is not enabled so that only keys surrounded by `@` are
filtered by the build.
Closes gh-3092
Prior to 8.0.28 Tomcat required the key store and trust store (if any)
to be available directly on the filesystem, i.e. classpath: resources
would not work. Tomcat 8.0.28 removed this limitation.
This commit updates to Tomcat 8.0.28, updates the tests to verify
the new Tomcat capability and removes the obsolete documentation of
the restriction.
Closes gh-4048
Previously, if Solr 5 was on the classpath, SolrAutoConfiguration
would fail with a rather cryptic error message due to a change in the
inheritance hierarchy of CloudSolrServer between Solr 4 and Solr 5.
This commit updates SolrAutoConfiguration to be conditional on a
class that exists in Solr 4 but was removed in Solr 5. This has the
effect of switching off the auto-configuration when Solr 5 is on
the classpath, allowing the auto-configuration report to be used to
identify why the configuration was disabled. The documentation has
also been updated to state that Spring Boot does not currently support
Solr 5.0.
Closes gh-2795
This commit adds a new property, logging.register-shutdown-hook, that
when set to true, will cause LoggingApplicationListener to register
a shutdown hook the first time it initializes a logging system. When
the JVM exits, the shutdown hook shuts down each of the supported
logging systems, ensuring that all of their appenders have been
flushed and closed.
Closes gh-4026
This commit changes the new mode-based configuration to use two new
methods – setBannerMode on SpringApplication and bannerMode on
SpringApplicationBuilder. The old methods, setShowBanner and
showBanner on SpringApplication and SpringApplicationBuilder
respectively, have been reinstated and deprecated.
Closes gh-4001
This commit adds the option to output the banner using the logger
instead of standard out. Rather than taking a boolean
spring.main.show-banner is now configured using an enum. Three values
are supported:
- LOG: the banner is logged
- CONSOLE: the banner is printed to standard out (previously true)
- OFF: the banner is switched off (previously false)
The default behavior remains unchanged; the banner will be printed to
standard out.
Closes gh-4022
See gh-4001
Previously `spring.velocity.charset` only controlled the output encoding
with the templates being loaded with the default encoding. We now
consistently set the same value for both the input and output encodings.
It is still possible to override it to a different value using
`spring.velocity.properties.input.encoding`
Closes gh-3994
Previously `spring.velocity.charset` only controlled the output encoding
with the templates being loaded with the default encoding. We now
consistently set the same value for both the input and output encodings.
It is still possible to override it to a different value using
`spring.velocity.properties.input.encoding`
Closes gh-3994
This change applies only to "standard" MVC endpoints (not the extended
ones like /env and /jolokia which already have this feature). Allows
users to supply an endpoints.{name}.path.
Fixes gh-2790
This commit adds two new properties, spring.devtools.remote.proxy.host
and spring.devtools.remote.proxy.port that can be used to configure
RemoteSpringApplication to connect to the remote application through
an HTTP proxy.
Closes gh-3968
In order to have more control on the structure of the configuration, we
do not bind to `RepositoryRestConfiguration` directly anymore. This
commit introduces `RepositoryProperties` instead.
See gh-3854
Closes gh-4073
Add `error.include-stacktrace` configuration option to determine when
stack trace attributes should be added. Options are `never`, `always`
or `on-trace-param`.
Prior to this commit stacktrace attributes were never includes in HTML
responses, and only included in JSON responses when a `trace` request
parameter was set to `true`. This has now been changed so that,
by default, stacktrace attributes are never included.
The BasicErrorController includes a protected method that can be
overridden if includes should be different depending on the `produces`
mapping.
Closes gh-2371
Update MetricExportAutoConfiguration to auto-configure statsd metrics
export when a `spring.metrics.export.statsd.host` property is set.
Closes gh-3719
Add aliases for `@ComponentScan`attributes on `@SpringBootApplication`
so that it is possible to customize how the component scan should be
applied on the project.
Previously, one would have to revert to `@EnableAutoConfiguration` to
achieve the same result.
Closes gh-3368
Provide a general purpose Hazelcast integration (i.e. not tied to caching).
Auto-configure a `HazelcastInstance` either based on the presence of a
`Config` bean or a configuration file. Said configuration file can be
specified explicitly or automatically found from default locations.
The cache integration already supports Hazelcast so it has been reworked
to automatically reuse an existing `HazelcastInstance` if available.
Closes gh-2942
Use "return" instead of "exit" where possible, especially in
function definitions.
Also fixed the exit codes to match the LSB spec for some specific
conditions (fixes gh-3521).
Fixes gh-3199, fixes gh-3535
Users sometimes create beans of type Converter and don't expect that to
automatically trigger a cascade of early initialization. This change adds
a qualifier to the Converters that are used by @ConfigurationProperties,
so they can be isolated (and simple).
Fixes gh-2669
Spring MVC requires all handlers for the same path to be on the same handler
so if anyone wants to add new handlers for different content types they
have to copy a lot of code from BasicErrorController. This change increases
the visibility of the basic utility methods in BasicErrorController so that
custom handlers can be added easily.
Fixes gh-3828
This commit adds a new annotation, @ServletComponentScan, that can be
used to enable scanning for @WebFilter, @WebListener, and @WebServlet
annotated classes. Registration beans will be automatically created for
any classes that are found, with the configuration derived from the
annotation.
Previously, native cache libraries were favored over a standard JSR-107
implementation. If a user has a working setup using JCache with one
provider and switch to another provider, his setup may be broken if we
happen to provide a native support for the new provider.
We now consistently favor JSR-107 if it is present. Native support can
still be enabled via the `spring.cache.type` property.
Closes gh-3822
Previously, manual meta-data were added to the existing set of entries
which could lead to duplicates if a manual entry is meant to complement
a property that is detected via the processor.
We now match the name and type of the item against the auto-detected
entries. If no match is found, we add the extra entry as we did before.
If a match is found we override the description, default value and
deprecation information.
Closes gh-3562
Given that Spring Boot uses java config accross the board, a new `value`
attribute is now aliased to the existing `classes` attribute such that
one could write the following:
@SpringApplicationConfiguration(MyConfig.class)
public class MyTest {}
Closes gh-3635
Changing the velocity view resolver to a VelocityLayoutViewResolver seems
a common use case so it has now a dedicated section in the relevant how
to.
Closes gh-3732
The default value of `spring.devtools.restart.exclude` is quite long and
any override requires to copy/paste it to add additional exclusions. To
avoid that, a new `spring.devtools.restart.additional-exclude` property
has been added.
Both properties are now used to compute the full list of exclusions that
is used by PatternClassPathRestartStrategy.
Closes gh-3774
The `spring.datasource.name` property was hidden behind the 'name'
attribute of the Tomcat connection pool (since we are mapping all
datasource implementations on the `spring.datasource` namespace.
This commit replace the injected value by hand with the use of the
regular `DataSourceProperties`. That way, we generate proper meta-data
for it as well.
Closes gh-3755
A new `spring.datasource.type` property can now be used to configure the
connection pool implementation to use (rather than only relying on Boot's
preferences).
Closes gh-3705
Improve the documentation to explain the necessary steps to create a
custom Spring Boot starter. In particular, provide more details regarding
naming conventions.
Closes gh-2537
See gh-2927
Previously, to use a custom ConfigurableWebBindingInitializer, it was
necessary to extend WebMvcConfigurationSupport and override
getConfigurableWebBindingInitializer. This had the unwanted
side-effect of switching off the auto-configuration of Spring MVC.
This commit updates the auto-configuration to look for a
ConfigurableWebBindingInitializer bean and register it with Spring
MVC.
Closes gh-2526
This commit provides a single endpoint, /actuator, that serves HTML
(the HAL browser) or JSON depending on the request’s accept header
that enables discovery of all of the actuator’s other endpoints.
When the management context path is configured, the /actuator endpoint
moves to the configured path, e.g. if the management context path is
set to /management, the actuator endpoint will be available from
/management.
Closes gh-3696
This commit adds a new property, logging.exception-conversion-word,
that can be used to configure the conversion word that is used when
logging exceptions. The default value, %rEx, will log exceptions
with the root cause first and include class packaging information in
the stack trace. The new property is supported when using either
Logback or Log4J2.
Closes gh-3684
Harmonize the configuration properties for Undertow to match the changes
made for gh-2491.
Move `spring.undertow.accessLog*` to `spring.undertow.accesslog.*`
Add `directory`, `prefix` and `suffix` properties to further customize
how access logs are configured on Tomcat. Relocate all properties to the
`server.tomcat.accesslog` namespace.
`server.tomcat.accessLogPattern` and `server.tomcat.accessLogEnabled` are
deprecated and replaced by `server.tomcat.accesslog.pattern` and
`server.tomcat.accesslog.enabled` respectively.
Closes gh-2491
Previously, only folders on the classpath would be watched and used
to trigger a restart/reload of the application. This commit adds a
new property spring.devtools.restart.additional-paths that can be
used to configure additional paths that should be watched for
changes. When a change occurs in one of those paths a restart or
reload will be triggered, depending on the full restart exclude
patterns configured via the existing spring.devtools.restart.exclude
property.
Closes gh-3469
Three conditions must be met for the console to be enabled:
- H2 is on the classpath
- The application is a web application
- spring.h2.console.enabled is set to true
If spring-boot-devtools is on the classpath, spring.h2.console.enabled
will be set to true automatically. Without the dev tools, the enabled
property will have to be set to true in application.properties.
By default, the console is available at /h2-console. This can be
configured via the spring.h2.console.path property. The value of this
property must begin with a '/'.
When Spring Security is on the classpath the console will be secured
based on the user's security.* configuration. When the console is
secured, CSRF protection is disabled and frame options is set to
SAMEORIGIN for its path. Both settings are required in order for the
console to function.
Closes gh-766
The `bootRun` gradle task or `spring-boot:run` maven goal can be used to
start a Spring Boot app with DevTools as long as forking is enabled. Add
an explicit note in the documentation to mention that.
Closes gh-3315
Add an auto-configuration that avoid a Spring Boot user to add
`@EnableConfigurationProperties` to its configuration to benefit from
that feature.
As our own auto-configurations are tested independently, such annotation
is still present to avoid a useless reference to this new
auto-configuration.
Closes gh-2457
Add `spring.autoconfigure.exclude` to control the list of
auto-configuration classes to exclude via configuration. Merge the
exclusions defined on the `@EnableAutoConfiguration` or
`@SpringBooApplication` if any.
Closes gh-2435
Add a "management.health.defaults.enabled" property that controls whether
the default health indicators are enabled. This allow to disable them all
by default and still enable individual ones using their respective
specific property.
Closes gh-2298
Currently, the default TemplateResolver had no specific order. Thymeleaf
handles that with a "always first" strategy (that can be confusing if
several TemplateResolver have a "null" order.
While it is a fine default (and changing it could lead to weird side
effects), it has to be changed as soon as another TemplateResolver bean
is defined in the project.
The `spring.thymeleaf.template-resolver-order` property has been added to
control the order of the default TemplateResolver.
Closes gh-3575
Allow to disable the auto-startup flag of the default JMS and RabbitMQ
containers. This effectively permit to disable automatic listening via
configuration.
Closes gh-3587
A RepositoryRestMvcConfiguration subclass provided by a user is
problematic in a Spring Boot application as it causes
RepositoryRestMvcConfiguration's bean declarations to be processed
before any auto-configuration runs.
One problem that this causes is that it switches off Boot's Jackson
auto-configuration due to RepositoryRestMvcConfiguration having
already declared multiple ObjectMapper beans. Unlike Boot's
auto-configured ObjectMapper, none of these ObjectMappers are marked
as @Primary. This then leads to wiring failures due to multiple
candidates being available.
To address this problem a new RepositoryRestConfigurer abstract has been
introduced in Spring Data Gosling. Its use is now strongly preferred
over subclassing RepositoryRestMvcConfiguration. Note that our own
RepositoryRestMvcConfiguration subclass remains. It is imported as part
of auto-configuration (avoiding the ordering problems described above),
and provides configuration properties binding for
RepositoryRestConfiguration. However, the Jackson ObjectMapper
configuration has been moved out into a new RepositoryRestConfigurer
implementation.
While SpringBootRepositoryRestMvcConfiguration remains, this commit
makes it package private to discourage users from subclassing it. While
this may break existing applications, it, coupled with the documentation
updates, will hopefully guide them toward using
RepositoryRestConfigurer.
Closes gh-3439
Previously, the Spring Boot Gradle plugin would always apply the
application plugin to a project. It then piggy-backed on the application
plugin’s mainClassName and applicationDefaultJvmArgs properties for the
configuration of the bootRun task.
This commit updates the Spring Boot Gradle plugin so that it no longer
applies the application plugin. If the user applies the application
plugin then its configuration will be used, but it’s a no longer
requirement.
Users who do not need the application plugin, but who were using the
mainClassName or applicationDefaultJvmArgs properties will need to
change their builds as a result of this change as those properties will
no longer exist. As before, the mainClassName can be configured on the
springBoot extension:
springBoot {
mainClassName 'com.example.YourApplication'
}
The applicationDefaultJvmArgs property can be used, but it must now be
declared with the project's ext block. For example:
ext {
applicationDefaultJvmArgs = [ '-Dcom.example.property=true' ]
}
Closes gh-2679
Update Tomcat, Jetty and Undertow to serialize session data when the
application is stopped and load it again when the application restarts.
Persistent session are opt-in; either by setting `persistentSession`
on the ConfigurableEmbeddedServletContainer or by using the property
`server.session.persistent=true`.
Fixes gh-2490
Previously, the prefix was spring.embedded-mongodb. This was
inconsistent with the prefixes for Artermis and HornetQ which are
spring.artemis.embedded and spring.hornetq.embedded respectively.
See gh-2002
Embedded MongoDB is now auto-configured when it is on the classpath.
The Mongo instance will listen on the port specified by the
spring.data.mongodb.port property. If this property has a value of
zero and randomly allocated port will be used. In such an event, the
MongoClient created by MongoAutoConfiguration will be automatically
configured to use the port that was allocated.
By default, MongoDB 2.6.10 will be used. This can be configured using
the spring.embedded-mongodb.version property. Mongo's sync delay
feature is enabled by default. This can be configured using the
spring.embedded-mongobd.features property.
Closes gh-2002
Add an explicit note about the need of Spring MVC for actuator HTTP
endpoints. Also explicitly mention Jersey since it can be a source of
confusion.
See gh-2025
Previously, an item could only have a 'deprecated' boolean flag to
indicate that the property is deprecated. It is desirable to provide an
additional description for the deprecation as well as the name of the
property to use instead.
The `deprecated` boolean flag is now supported. Instead, a `deprecated`
object can be specified with two optional attributes: `reason` to provide
an explanation for the deprecation and `replacement` to refer to the
property that should be used instead. If none of them is present, an
empty deprecation object should be set.
For backward compatibility, the `deprecated` field is still set.
Deprecation information can only set via manual meta-data.
Closes gh-3449
This commit adds a new property, spring.jackson.time-zone, that can be
used to configure the time zone that Jackson uses when configuring
dates. It affects the serialisation of both JDK and Joda date types.
Closes gh-3505
This commit enhances the CLI to use the repositories configured in the
profiles declared in a user's Maven settings.xml file during
dependency resolution. A profile must be active for its repositories
to be used.
Closes gh-2703
Closes gh-3483
I think this is safe, judging by the integration tests, but I'm not
putting it in 1.2.x until we've had some feedback on it. The
integration tests actually had a bug that was masking this problem
because they were merging Properties from the whole classpath instead
of picking the first available resource (which is generally what
we do in Spring Boot applications for application.properties for
instance).
Fixes gh-3048
Liquibase has a `changeLog` property that is definitely used as a
`Resource` but cannot be defined as such as the original String value
should be kept against an API we don't control.
Update the tests also to make it more clear that if hints are added
against a property that is detected automatically, said property still
keeps all its auto-discovered capabilities.
Closes gh-3457
Update AbstractLoggingSystem to pass LoggingInitializationContext to
loadDefaults() method to enable access to the environment.
DefaultLogbackConfiguration now uses this to find log pattern overrides.
Fixes gh-3367
Closes gh-3405
Replace the enum provider by a more general purpose provider that can
substitute the type of the property for the purpose of auto-completing
the values.
"handle-as" can be used for enums but for any type that the IDE
understands such as locale, charset, mime-type and Spring's resource
abstraction.
Closes gh-3457
Add ApplicationArguments interface which allows SpringApplication.run
arguments to be injected into any bean. The interface provides access
to both the raw String[] arguments and also provides some convenience
methods to access the parsed 'option' and 'non-option' arguments.
A new ApplicationRunner interface has also been added which is
similar to the existing CommandLineRunner.
Fixes gh-1990
Add support for the following server properties which can be used to
configure the session:
server.session.tracking-modes
server.session.cookie.name
server.session.cookie.domain
server.session.cookie.path
server.session.cookie.comment
server.session.cookie.http-only
server.session.cookie.secure
server.session.cookie.max-age
In addition `server.session-timeout` is now deprecated and has been
replaced with `server.session.timeout`.
Fixes gh-3240
Unfortunately, we have no other choice to flip the ignoreUnknownFields
attribute of `SecurityProperties` has many different target are now set
for that namespace outside the class. See gh-3445 for a potential way
to improve that.
Closes gh-3327
Use AbstractTemplateViewResolverProperties as the base class for
GroovyTemplateProperties since the Spring GroovyMarkupViewResolver is
an AbstractTemplateViewResolver.
The auto-configuration for Groovy is now more aligned with the existing
Freemarker and Velocity auto-configuration, with a `resourceLoaderPath`
property being used instead of `prefix`.
Fixes gh-3365
Closes gh-3374
Previously, all attempts to log a configuration file were logged at DEBUG
level which lead to a lot of noise as Spring Boot looks in many places by
default.
We now only log the files that are effectively found at DEBUG level and
all failed attempts at TRACE level.
Closes gh-3129
If a `JavaMailSenderImpl` is available, check that the underlying mail
server is available on startup. Add a `spring.mail.test-connection`
property to control this behaviour.
Closes gh-3408
If spring-hateoas is on the classpath and an MvcEndpoint returns a
@ResponseBody it will be extended and wrapped into a Resource with links.
All the existing endpoints that return sensible JSON data can be extended
this way (i.e. not /logfile). The HAL browser will also be added as an
endpoint if available on the classpath. Finally, asciidocs for the
Actuator endpoints are available as a separate jar file, which if
included in an app will also generate a new (HTTP) endpoint.
Fixes gh-1390
There is a new spring.factories entry for
org.springframework.boot.actuate.autoconfigure.EndpointWebMvcConfiguration
which loads extra beans into the MVC config for the Actuator.
If the management context is a child context all the beans go in the
child (except the Spring Security filter still). A big bonus is that
you can add WebConfigurerAdapters to configure static resources etc.
A new component called ManagementContextResolver can be used to
locate the ApplicationContext for the MVC endpoints.
Fixes gh-3345
This commit improves support of the Resource Handling features
introduced in Spring Framework 4.1. Those features add new ways to
resolve and transform static resources in applications.
See [this blog
post](https://spring.io/blog/2014/07/24/spring-framework-4-1-handling-static-web-resources)
for more details.
The `ResourceUrlEncodinFilter` is added for compatible template engines:
Velocity and Thymeleaf. It assists them with rewriting the URLs of
static resources when rendering templates.
New keys are added in the `ResourceProperties` in order to configure
the Resource Handling chain. `ResourceResolvers` and
`ResourceTransformers` are registered accordingly in
`WebMvcAutoConfiguration`.
Here is an example of enabling a `ContentVersionStrategy` on all
static resources, meaning their names will be changed for cache
busting purposes by adding a content hash at the end of the file name.
Like "/js/jquery.js -> /js/jquery-872ca6a9fdda9e2c1516a84cff5c3bc6.js".
```
spring.resources.chain.enabled:true
spring.resources.chain.strategy.content.enabled:true
spring.resources.chain.strategy.content.paths:/**
```
Closes gh-1604
Closes gh-3123
Improve the "hints" section of the metadata so that each hint can provide
the reference to a value provider.
A value provider defines how a tool can discover the potential values of
a property based on the context. The provider is identifed by a name and
may have an arbitrary number of parameters.
Closes gh-3303
Update documentation section that discusses uber jars since it conflates
the concepts of the uber jar and the shading of dependencies into jars
(which may or may not be true uber jars).
Fixes gh-3321
Create a new section in the meta-data called "hints" where users can
provide hints about a given property. The most basic use case for now
is to provide a list of values that a property can have. Each value may
have a description.
This sample JSON provides a basic example for a property called `foo.mode`
that exposes 3 values: "auto", "basic" and "advanced".
```
"hints": [
{
"id": "foo.mode",
"values": [
{
"value": "auto",
"description": "Some smart description."
},
{
"name": "basic"
},
{
"name": "advanced"
}
]
}
]
```
This information can be read by tools (such as IDE) and offer an
auto-completion with the list of values.
Closes gh-2054
Add AnsiPropertySource which allows named ANSI codes to be resolved
and update ResourceBanner to include it.
This commit also deprecates constants defined in AnsiElement and
replaces them with AnsiStyle, AnsiColor and AnsiBackground enums.
Closes gh-2704
These files are modified by Eclipse for some reason when you change files
like Thymeleaf HTML files. `META-INF/maven/**` has been added to the
default exclusion.
Closes gh-3295
Closes gh-3297
Update `ApplicationPidFileWriter` to support a 'fail on write error'
properties which allows the user to exit the application if the PID
file cannot be written.
This commit also deprecates `spring.pidfile` in favor of
`spring.pid.file` so that the new property can be added without overlap.
Fixes gh-2764
This commit adds support for automatically configuring Spring Session.
In a web application when both Spring Session and Spring Data Redis
are on the classpath, Spring Session's Redis Http Session support
will be auto-configured. The max inactive interval for Redis-backed
sessions can be configured via the environment using the existing
server.session-timeout property.
Closes gh-2318
Migrate `spring.view.prefix` and `spring.view.suffix` to
`spring.mvc.view.prefix` and `spring.mvc.view.suffix` respectively. The
former properties are still handled in a backward compatible way and are
defined as deprecated in the meta-data.
Closes gh-3250
Improve SpringApplicationAdminMXBean to expose additional information:
* Whether the application uses an embedded container
* The properties exposed by the `Environment`
This allows to know if the application is web-based and the HTTP port
on which it is running.
Closes gh-3067
Previously, the actual HTTP port on which a web application is running on
was only exposed in tests. This commit makes sure to provide that feature
regardless of the environment so that applications can know on which port
they are actually running on.
If there are several containers, each is exposed via the namespace of
their respective application context.
Closes gh-3259
Add a new `spring.mvc.async.request-timeout` property which can be used
to configure AsyncSupportConfigurer.setDefaultTimeout(..).
Fixes gh-2900
Closes gh-3236
for users to get started. It also makes it more flexible if different
aggregation keys are needed depending on the environment. The most
important new feature is the
spring.metrics.export.redis.aggregateKeyPattern configuration, which
fits the *.redis.key and prefix defaults. The aggregate reader uses
a prefix based on the key by default, with a naming convention that
the key starts with "keys.".
Update the Maven and Gradle repackage tasks so that the embedded
startup script is no longer included by default. This change is
primarily due to the `cf` command line not currently accepting
the unusual jar format.
Fixes gh-3045
Users can add @ExportMetric[Reader,Writer] to readers and writers that
they want to participate in the default exporter. There is also still an
@ActuatorMetricWriter that is used for the legacy (non-Java8) Gauge and
CounterServices.
The redis export and aggregate use case is a lot nicer with this
shared data between the two component types.
Also made MetricExportProperties itself a Trigger (so the default
delay etc. can be configured via spring.metrics.export.*).
Remove `spring.cache.config` as it is too generic and does not express
enough what is configured. This property is replaced by cache library
specific properties, that is `spring.cache.ehcache.config`,
`spring.cache.hazelcast.config`, `spring.cache.infinispan.config` and
`spring.cache.jcache.config`.
See gh-2633
Allow SSL to be configured via standard configuration as well as the
requestedHeartbeat. Switch to RabbitConnectionFactoryBean.
Closes gh-2655, gh-2676
User can enable OAuth2 SSO by declaring the intent (@EnableOAuth2Sso)
and also configuring the client properties (spring.oauth2.client.*).
The spring.oauth2.sso.* are only needed to change the path for the
login (defaults to /login) - any other security configuration for the
protected resources can be added in a WebSecurityConfigurerAdapter
which carries the @EnableOAuth2Sso annotation.
- Apply project’s code formatting and conventions
- Don’t use the IO and worker thread configuration when creating the
worker for the AccessLogReceiver. The IO and worker thread
configuration is for HTTP request processing and a worker in its
default configuration should be sufficient for the access log
receiver.
- Don’t use a temporary directory as the default for the access log
directory. A temporary directory makes (some) sense for Tomcat as it
requires a directory for its basedir. Undertow has no such
requirement and using a temporary directory makes it hard to locate
the logs. The default has been updated to a directory named logs,
created in the current working directory.
- Document the new properties in the application properties appendix
Closes gh-3014
Allow the display-name of the application to be customized when deployed
in an embedded container via the `server.display-name` property.
Closes gh-2600
Stephane Nicoll
Andy Wilkinson
“Jeremy
r11runner
Ray Sinnema
Phillip Webb
Dave Syer
izeye
zhanhb
Michael Stummvoll
Julien Dubois
Simon Buettner
Fabricio Colombo
Spring Buildmaster
Tommy Ludwig
Stéphane DERACO
Matt MacAulay
Josh Thornhill
Max Bruchmann
Eddú Meléndez
Rob Winch
drumonii
Lucas Saldanha
Sebastien Deleuze
Andrew Landsverk
Ivan Sopov
Rob Baily
Melvin Kicchi
Marten Deinum
Matt Benson
Brian Clozel
Ralph Schaer
Johannes Stelzer
Geoffrey Chandler
cohee016
Tomasz Przybyła
Artur Mkrtchyan
John Tims
ceilfors
Phil Parker
Joe Kutner