Given that Spring Boot uses java config accross the board, a new `value`
attribute is now aliased to the existing `classes` attribute such that
one could write the following:
@SpringApplicationConfiguration(MyConfig.class)
public class MyTest {}
Closes gh-3635
On start.spring.io, if you customize the artifactId it creates a zip file
with the same name. The `spring init` command did not have a similar
shortcut.
This commit updates the request to customize the artifactId if none is
set and a custom location was specified. Just as we check for the
presence of a dot to figure out if we have to extract the archive or not,
we check for it to generate an artifactId without an extension.
In practice, `spring init foo` creates a foo directory with a project
whose artifactId is `foo` and `spring init foo.zip` stores a foo.zip
file with the same project (i.e. the artifactId is `foo`).
Closes gh-3714
This commit enhances the CLI to use the repositories configured in the
profiles declared in a user's Maven settings.xml file during
dependency resolution. A profile must be active for its repositories
to be used.
Closes gh-2703
Closes gh-3483
Unfortunately, we have no other choice to flip the ignoreUnknownFields
attribute of `SecurityProperties` has many different target are now set
for that namespace outside the class. See gh-3445 for a potential way
to improve that.
Closes gh-3327
Previously, DefaultRepositorySystemSessionAutoConfiguration would
read the local repository configuration from settings.xml, but did
not perform any property interpolation. This would leave placeholders
such as ${user.home} as-is and result in the use of the wrong
location. To address this, the code that reads settings.xml has been
updated to provide the current System properties as a property
interpolation source.
RepositoryConfigurationFactory configures the local repository as a
"remote" repository when the local repository location has been
overridden. This allows spring grab to copy dependencies from the
local repository into the grab output location (configured via the
grape.root system property) rather than having to download them again.
This logic did not consider the customization of the local repository
location via settings.xml so the dependencies would be downloaded again.
To address this, RepositoryConfigurationFactory has been updated to
attempt to use the location configured in settings.xml, before falling
back to the default location.
The logic that reads settings.xml has deliberately been duplicated. It
could have been extracted into a separate class, but this is only a
temporary measure until gh-3275 is tackled. Duplication was deemed
preferable to adding a new public class in 1.2.x that we’d then want to
remove in 1.3.
Closes gh-3274
Remove explicit TestFailedException catch in CommandRunner and instead
rely on the fact that TestFailedException extends CommandException.
Fixes gh-3167
User can enable OAuth2 SSO by declaring the intent (@EnableOAuth2Sso)
and also configuring the client properties (spring.oauth2.client.*).
The spring.oauth2.sso.* are only needed to change the path for the
login (defaults to /login) - any other security configuration for the
protected resources can be added in a WebSecurityConfigurerAdapter
which carries the @EnableOAuth2Sso annotation.
* Automatically spin up Authorization Server and Resource Server
* Automatically configures method level security included OAuth2Expression handler
* Wrote extensive unit tests verifying default behavior as well as the auto-configuration backing off when custom Authorization/Resource servers are included
* Created org.springframework.boot.security.oauth2 subpackage to contain it
* Can also disable either resource of authorization server completely with a single property for each
* Print out the auto-generated secrets and other settings
* Added spring-boot-sample-secure-oauth2 to provide a sample that can be run and poked with curl as well as some automated tests.
* Make users ask for which servers to install by adding @Enable*
* User has to @EnableGlobalMethodSecurity instead of using properties files
Add Spring Security OAuth2 support to Spring Boot CLI
* Triggered from either @EnableAuthorizationServer or @EnableResourceServer
* Needs to have @EnableGlobalMethodSecurity to allow picking the annotation model.
* By default, comes with import support for @PreAuthorize, @PreFilter, @PostAuthorize, and @PostFilter via a single start import
* Also need import support for the enable annotations mentioned above.
* Added extra test case and sample (oauth2.groovy)
SpringApplicationLifecycle provides basic lifecycle operations on the
current Spring Boot application (that is checking if the application has
fully started and gracefully terminate the app). It can be registered as
an MBean of the platform MBean server if a specific property is set.
The Maven plugin uses that MBean to check that the application is ready
before ending the "start" phase. It uses it to trigger a proper shutdown
of the application during the "stop" phase.
If the process has to be forked, the platform MBean server is exposed on
a configurable port so that the maven plugin can connect to it.
Such change permits the maven plugin to integrate a classical integration
test scenario where the "start" goal is invoked during the
pre-integration phase and the "stop" goal during the post-integration
phase.
Closes gh-2525
Rework 155c60b7 to structure the code consistently, in particular with a more
natural order of attributes. Update test to use non-default values to ensure
that the customization has been applied.
See gh-2793
Update the CLI init command to expose additional attributes supported
by Spring Initializr. These are: groupId, artifactId, version, name,
description and language.
Closes gh-2793 and gh-2907
When a Java 8 JVM is launched with -XX:MaxPermSize a warning message
is output indicating that the option will be ignored. This causes the
CLI tests that assert that no error output has been produced to fail.
This commit updates the CLI's integration test harness to remove
JAVA_OPTS from the environment of the CLI process. This prevents any
unwanted max perm size configuration from leaking into that
environment and breaking the build.
When a Java 8 JMV is launched with -XX:MaxPermSize a warning message
is output indicating that the option will be ignored. This causes the
CLI tests that assert that no error output has been produced to fail.
This commit updates the CLI's integration test harness to remove
JAVA_OPTS from the environment of the CLI process. This prevents any
unwanted max perm size configuration from leaking into that
environment and breaking the build.
Previously, the CLI’s dependency management used proprietary Properties
file-based metadata to configure its dependency management. Since
spring-boot-gradle-plugin’s move to using the separate dependency
management plugin the CLI was the only user of this format.
This commit updates the CLI to use Maven boms to configure its
dependency management. By default it uses the spring-boot-dependencies
bom. This configuration can be augmented and overridden using the new
@DependencyManagementBom annotation which replaces @GrabMetadata.
Closes gh-2688
Closes gh-2439
SpringApplicationLifecycle provides lifecycle operations on the current
Spring Boot application. It can be registered as an MBean of the platform
MBean server if a specific property is set. Besides, the JMX name can
also be customized via a property in case more than one Spring Boot
application is started in the same process.
The Maven plugin uses that MBean to check that the application is ready
before ending the "start" phase. It uses it to trigger a proper shutdown
of the application during the "stop" phase.
If the process has to be forked, the platform MBean server is exposed on
a configurable port so that the maven plugin can connect to it.
Such change permits the maven plugin to integrate a classical integration
test scenario where the "start" goal is invoked during the
pre-integration phase and the "stop" goal during the post-integration
phase.
Closes gh-2525
Spring Framework’s ParamterizedRowMapper has been deprecated since
3.1 and has been removed in 4.2. Spring Batch currently relies on
ParameterizedRowMapper, making it incompatible with 4.2. To allow us to
build successfully against 4.2, this commit ignores Spring Boot’s tests
that use Spring Batch’s JDBC support.
See gh-2575
Update the `init` command to support the latest meta-data format. Recent
Spring Initializr version also supports Spring Boot CLI now and generates
a textual service capabilities when requested. The command no longer
generates the capabilities of the service unless said service does not
support it.
Closes gh-2515
Previously, JarCommand removed all @GrabResolver annotations in an
AST transformation. This was being performed as custom resolver
configuration is not necessary in a jar as all of the dependencies are
available from the jar. Furthermore, leaving the annotations in place
caused a failure when the jar was run due to a missing Ivy dependency
that's required by Groovy's default GrapeEngine, GrapeIvy.
The removal of @GrabResolver annotations was being done before they
could be used by Groovy's GrabAnnotationTransformation to configure
the GrapeEngine's resolvers. This resulted in the annotations having
no effect such that a dependency that was only available from a
repository made available by @GrabResolver would fail to resolve if
it was not cached locally.
This commit updates the AST transformation to leave the @GrabResolver
annotations in place but to set their initClass attribute to false.
This allows the annotation to be used while the jar's being compiled,
but supresses the generation of the static initializer that adds the
custom resolver to the GrapeEngine when the compiled code's run via
java -jar.
Fixes gh-2330
Update JarCommand to only include nested libraries that are actually
zip files. Similar to commit 38585bf3 which introduced the same
functionality to the Repackager.
Fixes gh-2094
Partly back port changes from affb202e and 85c95744f to fix the usage
of JMS in the CLI. Restore the integration test using HornetQ and fix the
coordinates of the JMS API.
Fixes gh-2075
Previously, specifying a simple target name for a regular project would
store the (zip) archive in a file matching the target name. Only adding a
slash at the end of the name allows to extract it as a directory. It
turns out that such convention is not easy to catch and if a simple name
is provided on the command-line, the user probably wants to create a
directory with such a name with the content of the project.
Note that if a build file is required and the name does not have any
extension, we still store a file with the required name as auto-detecting
the extension to use is not that easy.
Fixes gh-2056
This commit adds support to the CLI for launching a custom
SpringApplication implementation. The class that is launched can be
configured using the spring.application.class.name System property
or the SPRING_APPLICATION_CLASS_NAME environment variable with the
former taking priority.
Closes gh-2030
In 1.1, the Groovy template support did not check that its configured
template location exists. A check was added in 1.2, however this
breaks CLI web applications that don't have the expected templates
location.
Rather than reintroducing 1.1's behaviour by removing the check, this
commit updates the CLI to set
spring.groovy.template.check-template-location to false by default.
This allows flow-blown applications to benefit from the check, while
allowing CLI apps to behave as they did in 1.1.
Closes gh-1959
Spring initializr now declares an improved metadata format (v2).
InitializrServiceMetadata has been updated to parse this format. Note
that the client could be further improved by using HAL generated links.
Closes gh-1953
Update the InitializrService so that a 'SpringBootCli' User-Agent header
is sent with each request. This should allow the server-side code to
gracefully evolve the JSON format if needed.
Fixes gh-1869
Upgrade to latest versions of Tomcat and Jetty and to the latest Servlet
API whilst will remaining compatible with Tomcat 7 and Jetty 8.
Fixes gh-1832, gh-369
This commit updates the help command to also show some example(s) to
illustrate how the command can be used. The commit also defines useful
examples for the init command
Fixes gh-1809
Prior to this commit, specifying the --format and/or --build options
alongside --type did not use the explicit type as it should. This commit
ignores the --build and --format options if a type is explicitly set.
Fixes gh-1807
This commit moves the --output switch to a regular argument. This aligns
to other command, i.e. spring init my-project.zip would save the project
to "my-project.zip" in the current directory.
This commit also auto-detects the --extract option if the location ends
with a slash, i.e. spring init demo/ would extract the content of the
project in a demo directory that is local to the current directory.
Fixes gh-1802
Phillip Webb
Stephane Nicoll
Andy Wilkinson
Dave Syer
Spring Buildmaster
Eddú Meléndez
Greg Turnquist
Graeme Rocher